If you are looking at something like a mold in your house, it is necessary to call mold testing Pittsburgh experts and have them test your house for molds, their causes and then get rid of them. Molds not only spoils your house’s look and painted wall, it also affects your living environment and your health. Molds might also be hidden and so if you smell something, then you can get it tested for mold by measuring the air quality inside and outside of the house.
It is best to test molds using professional and good quality mold testers. They will collect the samples of the molds in your house, get it analyzed for the causes and eradication way and apply their research data to get rid of them from your house. Gathering the mold sample can be done with the use of mold testing kit, which is not much expensive and so if you purchase it, then you can do it yourself. But analyzing the sample for the cause and effects will require the experts of the field and so it is essential to call the proper people to avoid getting health issues via mold infection at your home.
If we are not expertise in mold testing, we would simply take a sample near the mold affected area and go for the analysis. But the experts such as Inspecta-pedia, the popular one in Mold Testing Pittsburgh take multiple samples in and around the mold area and throughout the house. Because the experts know that the mold spores varies from time to time and from places to places. Due to the fluctuation in the mold spore amount, the various sample collected will round them with the accurate result during the lab researches.
Types of mold testing
The samples of molds can be gather in the following ways:
• Air mold testing
• Surface mold testing and
• Bulk mold testing
If you want to make sure of the mold testing, you can do all the above three test since each of them have their own pros and cons. In the air mold testing, the air in the inside of the house and outside is taken into account the concentration of the mold spores is spotted out. These air samples are tested using a microscope and if your house has some invisible mold problems, then you can trace it using this air mold tests. But the mold spores differ from time to time and so there will be a drastic change in the accuracy of the results.
In surface testing, you can take the samples from mold affected surfaces using tape lifting, swabbing etc. This is not accurate than air testing, since the concentration of mold spores varies from time to time and from place to place. Hence, we can’t zero up on the concentration of the mold spores. Multiple samples testing involve samples taken from mold surface, area and from mold affected particles. This is very accurate when compared to the other 2 tests.
Apart from these modern mold tests, we can also adopt the traditional way of growing the small mold samples to grow into bigger sizes. By this way, we can identify the species of the mold. But the problem with this traditional mold testing is that it can only be testing with living molds and not in dead mold particles.
